1. Home
  2. Air
  3. Commercial exhaust CFM

Commercial exhaust CFM Calculator

Free Commercial exhaust CFM calculator. Room exhaust from a user-typed per-fixture or per-area rate — not a reprinted occupancy table. Runs in your browser; not a permit or a Manual J.

Updates in this browser · not a mechanical permit


Formula

Identity
Q = n × CFM/unit or Q = A × CFM/ft² (user-typed rates)
Steps

Estimate only. Use the adopted mechanical code, nameplate curves and a licensed designer. Not Manual J, not a listed hood, not electrical sizing.

What this calculator does

Ranking 62.1-style exhaust calculators split spaces into fixture counts (public toilets, showers) and area rates (janitor, locker, garage). They let you type the rate. This page does the same multiply: Q = n × CFM/unit or Q = A × CFM/ft². Chips 50 and 70 are the continuous/intermittent public-toilet pair those pages all mention; 1.0, 0.5 and 0.75 are the janitor / locker / parking figures they repeat as starting chips — you still own the rate.

It is not ASHRAE 62.1 Table 6-2 pasted into HTML. Do not treat a chip as the current standard for your occupancy.

Outdoor-air is the breathing-zone Rp+Ra form. Parking-garage already has 0.75 CFM/ft². This page is the rest of the exhaust schedule with a typed rate.

Related calculators on this site:

How to use it

Pick fixture or area, type the count or ft², set the rate (chip or custom). Example is three fixtures at 50 CFM.

Mode fixture/area, fixture count, floor area, user rate with 50/70/1.0/0.5/0.75 chips.

Values update in this browser as you type. Use Example for the same numbers as the worked section. Copy puts the result on the clipboard. Next links reuse the last CFM, ACH and temperatures you typed on this device.

Formula, units, and limits

Q = n × CFM/unit or Q = A × CFM/ft² (user-typed rates)

Reject zero or negative lengths, areas, flows, pressures and temperatures. This is a ranking-composite sketch, not a permit.

Inch-pound identities (CFM, ft, in. w.g., BTU/h, GPM) are the US HVAC default. SI chips use m³/h or L/s, metres, Pa, kW and L/s. 1 CFM ≈ 1.699 m³/h ≈ 0.472 L/s. 1 in. w.g. ≈ 249 Pa. Air density 0.075 lb/ft³ and the 1.08 / 0.68 / 500 / 24 factors assume near-standard air or water unless you override them.

When you would use it

Typical uses include:

1) Public toilet, 2 WC + 1 urinal, 50 CFM continuous.

2) Janitor closet at 1.0 CFM/ft².

3) Athletic locker at 0.5 CFM/ft².

None of these sketches replace a licensed mechanical engineer, a Manual J/D/S, a listed-hood submittal, or the mechanical code adopted on the job. Cleanrooms, health-care, and fire/smoke exhaust need those specifications.

Worked example

The Example button uses this set:

3 fixtures × 50 CFM = 150 CFM

Switch the mode to area and 1.0 / ft² for a janitor sketch

FAQ

Count lavatories?

Public toilet exhaust is per water closet or urinal on the pages this identity follows. Lavatories are not fixtures here.

50 or 70?

Continuous vs intermittent / heavy-use talk those pages share. Your code edition governs.

Private toilet?

Usually a per-room rate, not per fixture. Type that rate; do not use 50 blindly.

Commercial kitchen 0.70?

That is a room-exhaust rate, not a Type I hood. Open commercial-hood for the hood.

Makeup air?

Class 2/3 air is exhausted. Size makeup on makeup-air / makeup-heat.

SI rates?

Type the IP rate this page uses, or convert L/s·m² yourself. The multiply does not care.

References

Composite of ranking exhaust calculators: fixture vs area multiply, user-typed rates, common chips. Occupancy tables stay in the standard you bought.

  • ASHRAE Standard 62.1 and 62.2 — outdoor-air and dwelling-ventilation forms (overview of published identities; tables remain in the licensed standard).
  • International Mechanical Code — residential bath/kitchen exhaust discussion values commonly implemented as 50/20 CFM; confirm the adopted year.
  • ASHRAE Fundamentals — moist-air relations, duct fitting concepts, fan laws, hydronic constants 500 and 1.08.
  • ISO 14644-1 — cleanroom classification names (particle limits, not a mandatory ACH).
  • Magnus / WMO saturation vapor-pressure approximations for dew point.
  • Huebscher equivalent-diameter relation for rectangular ducts.

Disclaimer

Estimate only for commercial exhaust. The adopted 62.1/IMC edition and a licensed designer prevail.

Results are estimates computed on your device. Nameplate curves, TAB measurements, and the authority having jurisdiction control the installation. This site does not size refrigerant charge, fire dampers, medical gas, or electrical conductors.