| Altitude ft | ρ lb/ft³ sketch (70 °F dry) |
|---|---|
| 0 | 0.075 |
| 2,500 | 0.069 |
| 5,000 | 0.063 |
| 5,280 (Denver talk) | 0.062 |
P falls with the standard atmosphere; ρ = P / (R T). Open air density for a typed altitude. Scale 1.08 by ρ/0.075 on sensible loads. Fans move volume; mass and BHP change with ρ.
FAQ
Hot attic air?
T in Rankine is in the denominator. 140 °F air is much lighter than 70 °F at the same P.
Humidity?
Moist air is slightly less dense than dry at the same T,P. This table is dry.
SCFM?
Open SCFM/ACFM with T and P.
SI kg/m³?
0.075 lb/ft³ ≈ 1.20 kg/m³.
Boiling point?
Not this page.
Limits
Not ASHRAE weather data and not a psychrometric altitude chart reprint.
Estimates only. Adopted mechanical code, nameplate curves, TAB readings and a licensed designer prevail. This is not Manual J, not a listed-hood submittal, and not a permit drawing.